Double Glazing Door Lock Repairs
Have your uPVC window or door mechanism become faulty? Maybe the window or door handles don't meet up properly or are hard to use.
It is essential that your double-glazed doors operate smoothly, otherwise you'll be wasting energy and increase the chances of burglary. Owen the Locksmith can fix your door lock at an affordable cost.
Snapped Key
If a key breaks within a lock, it could be extremely annoying. It also poses an issue for security, since the door may not lock and make you vulnerable to intruders. Fortunately, there are some simple fixes you can try to resolve the issue and get your door functioning properly once more.
Keep calm. If you panic you could end up pushing the damaged key further into the lock.
Next, spray WD-40 or another penetrating oil into the lock to aid in making the broken piece slide out more easily. You can also use a screwdriver to help break up any pieces stuck that could be blocking the way. If you have a chunk of the key still sticking out, grab it with a paperclip or another thin metal object and pull it. Both methods work, but you must be careful not to push the broken key piece further into the keyway.
Some paperclips have grooved edges that can be used as hook extractors. Jigsaw blades are also well for this. If you don't have any of them handy, you can make use of needle-nose pliers that bend to create hooks. Additionally, a pair of tweezers can be used to grip and pull out the remaining bit of the broken key.
If you are unable remove the broken key piece then you can use a lock deicer. It's available at most hardware stores and works by freezing any moisture that may be present inside the lock.
If none of these solutions work, it might be time to call a locksmith. double glazing repair near me are able to quickly fix problems with uPVC door locks and mechanisms that have snapped keys as well as broken handles. They can also reconfigure double glazing door mechanisms to ensure that they are more easy to operate. You can book repairs to your double-glazing online or contact us to discuss your requirements.
Broken Cylinder
A damaged cylinder could pose a major security risk. A locksmith professional can repair the cylinder. To fix the cylinder, a locksmith will need to tap it. This can be accomplished with a hammer or other tool. The best method is to use a wire or a long match. The match or wire's end in the keyway. The locksmith will then strike the lock to crack it. This is better than using a hammer, which can harm the lock.
The most frequent cause of cracks in the cylinder head is overheating. This can happen when the cylinder block as well as the cylinder head are made of various metals, like cast iron and aluminium. Different metals can heat up and cool down at different rates. This can cause localised hotspots to expand quicker than the rest of the cylinder.
Another possible cause for cylinder cracks is corrosion. If the cylinder head as well as the block of the cylinder are not properly maintained, this can lead to rusting or corrosion, which may cause them to expand at greater rates than they should. This can cause cracks in the future.
If your uPVC window or door lock is rigid and requires more pressure to turn it could be due to a variety of reasons. This problem can be caused by a faulty locking mechanism, or misalignment and also a worn out handle.
Fortunately it is a simple and inexpensive fix for most homeowners with double glazing. A professional locksmith will usually solve this issue within an hour of arriving at the home. They can replace the locking mechanisms, or change the window handles and replace the gearboxes based on your particular requirements. A professional locksmith will be able to inform you on the most cost-effective solutions for your home. They can also suggest upgrades to the highest-security 3 Star TS007 euro cylinders that will add an extra layer of protection against burglars. This is a small cost to pay for the peace of mind that comes from knowing your uPVC doors are safe.
Broken Handle
Window handle locks are complex mechanisms that deteriorate with time and use, so it's not a surprise that they can break. It can be difficult to determine the cause of the broken window handle lock and fix it correctly.
Fixing your broken handle, regardless of whether it's the internal locking mechanism or latch will increase the security of your uPVC door and prevent draughts. When you aren't doing it right, replacing or repairing your handle can be expensive and can damage the door's frame and lock, so it's worth taking some time to do it right.
Screwdriver Open the window remove the screw that holds the handle. It should be located on the inside of the back plate, normally covered by a screw cover for aesthetic reasons. Be sure not to damage any of the internal components inside the handle, such as the levers or plates on either side of the spindle. Ideally, keep them in the same place so you can replace them again in the event of a need.
Then, turn the handle to make it 90 degrees to the window frame. Finally, loosen the screw on the back of the handle that holds it to the internal spindle using a second screwdriver. Once the screw is free, you can remove the handle and remove the broken spindle. Replace it with a brand new one, ensuring it is the same length as the old one (you will typically find them on the internet or at hardware stores) and then securely screw it into the right place. Be careful not to overtighten as this could damage the handle or the window frame.
Close the handle and try it. The hope is that it will function smoothly and you'll be able open your window once more.
Don't forget to double-check that your uPVC window is closing properly when you're working with the handle. If they aren't closing correctly, you could encounter damp or draughts in your home. It could also affect the energy efficiency of your home. Core Sash Windows is a local window company that can alter the hinges of the window frames to ensure they close correctly.
Broken Spindle
It is more likely for the spindle to break than the handle. This is especially typical in uPVC tilt and turn windows. These types of windows require a handle that is a lock mechanism that is located in the window frame. The handle is attached to a centre rod that is then activated by a series of cams that look like mushrooms, they secure the frame of the window. If the dead latch mechanism does not open when the handle is turned it is likely that the spindle is broken This can be a frustrating problem.
There are solutions to this issue. A good locksmith will be able to quickly and efficiently repair this issue. A professional locksmith can disassemble the handle of the window by using a tool to remove the wheel from the area in which the spindle is. This can be done without causing any damage to the handle or causing other damage to the frame of the window.
After removing the wheel, the technician can inspect the spindle to determine the cause of the break. This involves breaking the spindle into its constituent parts and carefully recording their general condition, as well as any particular areas of wear or damage. The process is done in a clean environment by skilled technicians.
Next, clean the damaged spindle. This will help remove any dirt or other debris that might be preventing it from functioning normally. The spindle may be repaired or replaced. If the technician is replacing the spindle it is possible to use a dowel that is similar in size to the original. Then, he will drill matching holes into both pieces. This will ensure that the spindle fits perfectly with the handle.
If the damaged spindle can't be repaired, it might require replacement. Home centers can sell generic replacements, but if your window style is rare, you will need to contact an expert in cabinet making or woodworking who can make the exact part. After the spindle is installed, it can be connected to the handle. The screw holes on the handle with the existing screws in the frame. Once the handle is securely set, you are able to operate your uPVC windows.